Sort By
Products:
Material
MIL-STD
Bond Straps
Mounting Hardware
HEMI Part #: GS 104
Grounding Bosses
• CRES 316L Stainless Steel Upper • 5086 or 5083 Aluminum Lower • Explosion Bonded for Unparalleled Strength • 3/8″ – 16 UNC – Tapped Hole • Length: 1.5″ • Diameter: 0.75″ • HEMI Part #: GS 100
Material: Al/SS Bimetallic
HEMI Part #: GS 100

• CRES 316L Stainless Steel Upper

• 5086 or 5083 Aluminum Lower

• Explosion Bonded for Unparalleled Strength

• 3/8″ – 16 UNC – Tapped Hole

• Length: 1.5″

• Diameter: 5/8″

• HEMI Part #: GS 300

 

Material: Al/SS Bimetallic
HEMI Part #: GS 300

• CRES 316L Stainless Steel Upper

• 5086 or 5083 Aluminum Lower

• Explosion Bonded for Unparalleled Strength

• 3/8″ D – 16 UNC – Threaded Stud

• Length: 1.5″

• Stud Length: 5/8″

• Diameter: 0.75″

• HEMI Part #: GS 100-E

 

Material: Al/SS Bimetallic
HEMI Part #: GS 100-E

• CRES 316L Stainless Steel

• 3/8″ – 16 UNC – Tapped Hole

• Length: 1.25″

• Diameter: 5/8″

• HEMI Part #: GS 301

 

Material: Stainless Steel
HEMI Part #: GS 301

• CRES 316L Stainless Steel

• 3/8″ – 16 UNC – Tapped Hole

• Length: 1.25″

• Diameter: 0.75″

• HEMI Part #: GS 101

 

Material: Stainless Steel
HEMI Part #: GS 101

• CRES 316L Stainless Steel

• Stud Weldable in accordance with MIL-S-241949

• 3/8″ – 16 UNC – Tapped Hole

• Length: 1.25″

• Diameter: 5/8″

• HEMI Part #: GS 301-SGC

 

Material: Stainless Steel
HEMI Part #: GS 301SGC
Bond Straps

• Corrosion resistant CRES 316L Stainless Steel

• 1/4″ CRES stranded wire

• Precision cut 25/64″ holes

• Ends crimped to 0.24″

• Length: 6″ end-to-end

• Conforms to the exacting MIL-DTL-24749 Revision A

• HEMI Part #: GS 105-6

 

Click here for Type I, Rev B & C.

 

Material: Stainless Steel
HEMI Part #: GS 105-6

• Corrosion resistant CRES 316L Stainless Steel

• 1/4″ CRES stranded wire

• Precision cut 25/64″ holes

• Ends crimped to 0.24″

• Length: 9″ end-to-end

• Conforms to the exacting MIL-DTL-24749 Revision A

• HEMI Part #: GS 105-9

 

Material: Stainless Steel
HEMI Part #: GS 105-9

• Corrosion resistant CRES 316L Stainless Steel

• 1/4″ CRES stranded wire

• Precision cut 25/64″ holes

• Ends crimped to 0.24″

• Length: 12″ end-to-end

• Conforms to the exacting MIL-DTL-24749 Revision A

• HEMI Part #: GS 105-12

 

Material: Stainless Steel
HEMI Part #: GS 105-12

• Corrosion resistant CRES 316L Stainless Steel

• 1/4″ CRES stranded wire

• Precision cut 25/64″ holes

• Ends crimped to 0.24″

• Length: 18″ end-to-end

• Conforms to the exacting MIL-DTL-24749 Revision A

• HEMI Part #: GS 105-18

 

Material: Stainless Steel
HEMI Part #: GS 105-18

• Corrosion resistant CRES 316L Stainless Steel

• 1/4″ CRES stranded wire

• Precision cut 25/64″ holes

• Ends crimped to 0.24″

• Length: 24″ end-to-end

• Conforms to the exacting MIL-DTL-24749 Revision A

• HEMI Part #: GS 105-24

 

Material: Stainless Steel
HEMI Part #: GS 105-24

• Corrosion resistant CRES 316L Stainless Steel

• 1/4″ CRES stranded wire

• Precision cut 25/64″ holes

• Ends crimped to 0.24″

• Length: 26″ end-to-end

• Conforms to the exacting MIL-DTL-24749 Revision A

• HEMI Part #: GS 105-26

 

Material: Stainless Steel
HEMI Part #: GS 105-26

• Corrosion resistant CRES 316L Stainless Steel

• 1/4″ CRES stranded wire

• Precision cut 25/64″ holes

• Ends crimped to 0.24″

• Length: 28″ end-to-end

• Conforms to the exacting MIL-DTL-24749 Revision A

• HEMI Part #: GS 105-28

 

Material: Stainless Steel
HEMI Part #: GS 105-28

• Corrosion resistant CRES 316L Stainless Steel

• 1/4″ CRES stranded wire

• Precision cut 25/64″ holes

• Ends crimped to 0.24″

• Length: 30″ end-to-end

• Conforms to the exacting MIL-DTL-24749 Revision A

• HEMI Part #: GS 105-30

 

Material: Stainless Steel
HEMI Part #: GS 105-30

• Corrosion resistant CRES 316L Stainless Steel

• 1/4″ CRES stranded wire

• Precision cut 25/64″ holes

• Ends crimped to 0.24″

• Length: 36″ end-to-end

• Conforms to the exacting MIL-DTL-24749 Revision A

• HEMI Part #: GS 105-36

 

Material: Stainless Steel
HEMI Part #: GS 105-36

• Corrosion resistant CRES 316L Stainless Steel

• 1/4″ CRES stranded wire

• Precision cut 25/64″ holes

• Ends crimped to 0.24″

• Length: 40″ end-to-end

• Conforms to the exacting MIL-DTL-24749 Revision A

• HEMI Part #: GS 105-40

 

Material: Stainless Steel
HEMI Part #: GS 105-40

• Corrosion resistant CRES 316L Stainless Steel

• 1/4″ CRES stranded wire

• Precision cut 25/64″ holes

• Ends crimped to 0.24″

• Length end-to-end: Custom

• Conforms to the exacting MIL-DTL-24749 Revision A

• HEMI Part #: GS 105-X

 

Material: Stainless Steel
HEMI Part #: GS 105-X

• Corrosion resistant CRES 316L Stainless Steel

• 1/4″ CRES stranded wire

• Precision cut 13/32″ holes

• Ends crimped to 0.20″

• Length: 6″ end-to-end

• Conforms to the exacting MIL-DTL-24749 Revision B

• HEMI Part #: GS 305-6

 

Material: Stainless Steel
HEMI Part #: GS 305-6

• Corrosion resistant CRES 316L Stainless Steel

• 1/4″ CRES stranded wire

• Precision cut 13/32″ holes

• Ends crimped to 0.20″

• Length: 9″ end-to-end

• Conforms to the exacting MIL-DTL-24749 Revision B

• HEMI Part #: GS 305-9

 

Material: Stainless Steel
HEMI Part #: GS 305-9

• Corrosion resistant CRES 316L Stainless Steel

• 1/4″ CRES stranded wire

• Precision cut 13/32″ holes

• Ends crimped to 0.20″

• Length: 12″ end-to-end

• Conforms to the exacting MIL-DTL-24749 Revision B

• HEMI Part #: GS 305-12

 

Material: Stainless Steel
HEMI Part #: GS 305-12

• Corrosion resistant CRES 316L Stainless Steel

• 1/4″ CRES stranded wire

• Precision cut 13/32″ holes

• Ends crimped to 0.20″

• Length: 18″ end-to-end

• Conforms to the exacting MIL-DTL-24749 Revision B

• HEMI Part #: GS 305-18

 

Material: Stainless Steel
HEMI Part #: GS 305-18

• Corrosion resistant CRES 316L Stainless Steel

• 1/4″ CRES stranded wire

• Precision cut 13/32″ holes

• Ends crimped to 0.20″

• Length: 24″ end-to-end

• Conforms to the exacting MIL-DTL-24749 Revision B

• HEMI Part #: GS 305-24

 

Material: Stainless Steel
HEMI Part #: GS 305-24

• Corrosion resistant CRES 316L Stainless Steel

• 1/4″ CRES stranded wire

• Precision cut 13/32″ holes

• Ends crimped to 0.20″

• Length: 26″ end-to-end

• Conforms to the exacting MIL-DTL-24749 Revision B

• HEMI Part #: GS 305-26

 

Material: Stainless Steel
HEMI Part #: GS 305-26

• Corrosion resistant CRES 316L Stainless Steel

• 1/4″ CRES stranded wire

• Precision cut 13/32″ holes

• Ends crimped to 0.20″

• Length: 28″ end-to-end

• Conforms to the exacting MIL-DTL-24749 Revision B

• HEMI Part #: GS 305-28

 

Material: Stainless Steel
HEMI Part #: GS 305-28

• Corrosion resistant CRES 316L Stainless Steel

• 1/4″ CRES stranded wire

• Precision cut 13/32″ holes

• Ends crimped to 0.20″

• Length: 30″ end-to-end

• Conforms to the exacting MIL-DTL-24749 Revision B

• HEMI Part #: GS 305-30

 

Material: Stainless Steel
HEMI Part #: GS 305-30

• Corrosion resistant CRES 316L Stainless Steel

• 1/4″ CRES stranded wire

• Precision cut 13/32″ holes

• Ends crimped to 0.20″

• Length: 36″ end-to-end

• Conforms to the exacting MIL-DTL-24749 Revision B

• HEMI Part #: GS 305-36

 

Material: Stainless Steel
HEMI Part #: GS 305-36

• Corrosion resistant CRES 316L Stainless Steel

• 1/4″ CRES stranded wire

• Precision cut 13/32″ holes

• Ends crimped to 0.20″

• Length: 40″ end-to-end

• Conforms to the exacting MIL-DTL-24749 Revision B

• HEMI Part #: GS 305-40

 

Material: Stainless Steel
HEMI Part #: GS 305-40

• Corrosion resistant CRES 316L Stainless Steel

• 1/4″ CRES stranded wire

• Precision cut 13/32″ holes

• Ends crimped to 0.20″

• Length end-to-end: Custom

• Conforms to the exacting MIL-DTL-24749 Revision B

• HEMI Part #: GS 305-X

 

Material: Stainless Steel
HEMI Part #: GS 305-X

• Corrosion resistant CRES 316L Stainless Steel

• 0.024″ thick

• Precision cut 13/32″ holes

• Length: 3.0″ hole-to-hole

• Overall length: 4.406″

• Width: 1.0″

• Conforms to the exacting MIL-DTL-24749 Revision A and MIL-DTL-24749 Revision B

• HEMI Part #: GS 114-3

 

Material: Stainless Steel
HEMI Part #: GS 114-3

• Corrosion resistant CRES 316L Stainless Steel

• 0.024″ thick

• Precision cut 13/32″ holes

• Length: 6.0″ hole-to-hole

• Overall length: 7.406″

• Width: 1.5″

• Conforms to the exacting MIL-DTL-24749 Revision A and MIL-DTL-24749 Revision B

• HEMI Part #: GS 114-6

 

Material: Stainless Steel
HEMI Part #: GS 114-6

• Corrosion resistant CRES 316L Stainless Steel

• 0.024″ thick

• Precision cut 13/32″ holes

• Length: 9.0″ hole-to-hole

• Overall length: 10.406″

• Width: 2″

• Conforms to the exacting MIL-DTL-24749 Revision A and MIL-DTL-24749 Revision B

• HEMI Part #: GS 114-9

 

Material: Stainless Steel
HEMI Part #: GS 114-9

• Corrosion resistant CRES 316L Stainless Steel

• 0.024″ thick

• Precision cut 13/32″ holes

• Length: 12″ hole-to-hole

• Overall length: 13.406″

• Width: 2.5″

• Conforms to the exacting MIL-DTL-24749 Revision A and MIL-DTL-24749 Revision B

• HEMI Part #: GS 114-12

 

Material: Stainless Steel
HEMI Part #: GS 114-12

• Corrosion resistant CRES 316L Stainless Steel

• 0.024″ thick

• Precision cut 13/32″ holes

• Length: 18″ hole-to-hole

• Overall length: 19.406″

• Conforms to the exacting  MIL-DTL-24749 Revision A and MIL-DTL-24749 Revision B

• HEMI Part #: GS 114-18

 

Material: Stainless Steel
HEMI Part #: GS 114-18

• Corrosion resistant CRES 316L Stainless Steel

• 0.024″ thick

• Precision cut 13/32″ holes

• Length hole-to-hole: Custom

• Overall length: Custom

• Width: Custom

• Conforms to the exacting MIL-DTL-24749 Revision A and MIL-DTL-24749 Revision B

• HEMI Part #: GS 114-X

 

Material: Stainless Steel
HEMI Part #: GS 114-X

• Pure Copper

• 0.024″ thick

• Precision cut 13/32″ holes

• Length: 3.0″ hole-to-hole

• Overall length: 4.406″

• Width: 1.0″

• Conforms to the exacting MIL-DTL-24749 Revision A and MIL-DTL-24749 Revision B

• HEMI Part #: GS 115-3

 

Material: Copper
HEMI Part #: GS 115-3

• Pure Copper

• 0.024″ thick

• Precision cut 13/32″ holes

• Length: 6.0″ hole-to-hole

• Overall length: 7.406″

• Width: 1.5″

• Conforms to the exacting MIL-DTL-24749 Revision A and MIL-DTL-24749 Revision B

• HEMI Part #: GS 115-6

 

Material: Copper
HEMI Part #: GS 115-6

• Pure Copper

• 0.024″ thick

• Precision cut 13/32″ holes

• Length: 9.0″ hole-to-hole

• Overall length: 10.406″

• Width: 2.0″

• Conforms to the exacting MIL-DTL-24749 Revision A and MIL-DTL-24749 Revision B

• HEMI Part #: GS 115-9

 

Material: Copper
HEMI Part #: GS 115-9

• Pure Copper

• 0.024″ thick

• Precision cut 13/32″ holes

• Length: 10.0″ hole-to-hole

• Overall length: 11.406″

• Width: 2.5″

• Conforms to the exacting MIL-DTL-24749 Revision A and MIL-DTL-24749 Revision B

• HEMI Part #: GS 115-10

 

Material: Copper
HEMI Part #: GS 115-10

• Pure Copper

• 0.024″ thick

• Precision cut 13/32″ holes

• Length: 12.0″ hole-to-hole

• Overall length: 13.406″

• Width: 2.5″

• Conforms to the exacting MIL-DTL-24749 Revision A and MIL-DTL-24749 Revision B

• HEMI Part #: GS 115-12

 

Material: Copper
HEMI Part #: GS 115-12

• Pure Copper

• 0.024″ thick

• Precision cut 13/32″ holes

• Length: 18.0″ hole-to-hole

• Overall length: 19.406″

• Conforms to the exacting MIL-DTL-24749 Revision A and MIL-DTL-24749 Revision B

• HEMI Part #: GS 115-18

 

Material: Copper
HEMI Part #: GS 115-18

• Pure Copper

• 0.024″ thick

• Precision cut 13/32″ holes

• Hole-to-Hole Length: Custom

• Overall Length: Custom

• Width: Custom

• Conforms to the exacting MIL-DTL-24749 Revision A and MIL-DTL-24749 Revision B

• HEMI Part #: GS 115-X

 

Material: Copper
HEMI Part #: GS 115-X

• Tinned copper braided wire

• Braid rolled to 1/20″ thickness

• 1″ wide pure copper end terminals

• End terminals are hot tin dipped and flux coated

• Precision cut 13/32″ holes

• Length hole-to-hole: 6″

• Conforms to the exacting MIL-DTL-24749 Revision A

• HEMI Part #: GS 116-6

 

Material: Tinned Copper
HEMI Part #: GS 116-6

• Tinned copper braided wire

• Braid rolled to 1/20″ thickness

• 1″ wide pure copper end terminals

• End terminals are hot tin dipped and flux coated

• Precision cut 13/32″ holes

• Length hole-to-hole: 12″

• Conforms to the exacting MIL-DTL-24749 Revision A

• HEMI Part #: GS 116-12

 

Material: Tinned Copper
HEMI Part #: GS 116-12

• Tinned copper braided wire

• Braid rolled to 1/20″ thickness

• 1″ wide pure copper end terminals

• End terminals are hot tin dipped and flux coated

• Precision cut 13/32″ holes

• Length hole-to-hole: 18″

• Conforms to the exacting MIL-DTL-24749 Revision A

• HEMI Part #: GS 116-18

 

Material: Tinned Copper
HEMI Part #: GS 116-18

• Tinned copper braided wire

• Braid rolled to 1/20″ thickness

• 1″ wide pure copper end terminals

• End terminals are hot tin dipped and flux coated

• Precision cut 13/32″ holes

• Length hole-to-hole: Custom

• Conforms to the exacting MIL-DTL-24749 Revision A

• HEMI Part #: GS 116-X

 

Material: Tinned Copper
HEMI Part #: GS 116-X

• Braided wire strap consisting of 50% CRES 316L Stainless Steel & 50% Nickel 200

• Braid rolled to 1/20″ thickness

• 1″ wide CRES 316L Stainless Steel end terminals

• 13/32″ terminal holes for use with 3/8″ bolt

• Length hole-to-hole: 6″

• Conforms to the exacting MIL-DTL-24749 Revision B

• HEMI Part #: GS 316-6

 

Material: Stainless Steel & Nickel
HEMI Part #: GS 316-6

• Braided wire strap consisting of 50% CRES 316L Stainless Steel & 50% Nickel 200

• Braid rolled to 1/20" thickness

• 1" wide CRES 316L Stainless Steel end terminals

• 13/32" terminal holes for use with 3/8" bolt

• Length hole-to-hole: 12"

• Conforms to the exacting MIL-DTL-24749 Revision B

• HEMI Part #: GS 316-12

 

Material: Stainless Steel & Nickel
HEMI Part #: GS 316-12

• Braided wire strap consisting of 50% CRES 316L Stainless Steel & 50% Nickel 200

• Braid rolled to 1/20" thickness

• 1" wide CRES 316L Stainless Steel end terminals

• 13/32" terminal holes for use with 3/8" bolt

• Length hole-to-hole: 18"

• Conforms to the exacting MIL-DTL-24749 Revision B

• HEMI Part #: GS 316-18

 

Material: Stainless Steel & Nickel
HEMI Part #: GS 316-18

• Braided wire strap consisting of 50% CRES 316L Stainless Steel & 50% Nickel 200

• Braid rolled to 1/20" thickness

• 1" wide CRES 316L Stainless Steel end terminals

• 13/32" terminal holes for use with 3/8" bolt

• Length hole-to-hole: Custom

• Conforms to the exacting MIL-DTL-24749 Revision B

• HEMI Part #: GS 316-X

 

Material: Stainless Steel & Nickel
HEMI Part #: GS 316-X

• Braided wire strap consisting of 50% CRES 316L Stainless Steel & 50% Nickel 200

• Braid rolled to 1/20″ thickness

• 1″ wide CRES 316L Stainless Steel end terminals

• 9/32″ terminal holes for use with 3/8″ bolt

• Length hole-to-hole: 6″

• Conforms to the exacting MIL-DTL-24749 Revision B

• HEMI Part #: GS 316-6-0.281

 

Material: Stainless Steel & Nickel
HEMI Part #: GS 316-6-0.281

• Braided wire strap consisting of 50% CRES 316L Stainless Steel & 50% Nickel 200

• Braid rolled to 1/20" thickness

• 1" wide CRES 316L Stainless Steel end terminals

• 9/32" terminal holes for use with 3/8" bolt

• Length hole-to-hole: 12"

• Conforms to the exacting MIL-DTL-24749 Revision B

• HEMI Part #: GS 316-12-0.281

 

Material: Stainless Steel & Nickel
HEMI Part #: GS 316-12-0.281

• Braided wire strap consisting of 50% CRES 316L Stainless Steel & 50% Nickel 200

• Braid rolled to 1/20" thickness

• 1" wide CRES 316L Stainless Steel end terminals

• 9/32" terminal holes for use with 3/8" bolt

• Length hole-to-hole: 18"

• Conforms to the exacting MIL-DTL-24749 Revision B

• HEMI Part #: GS 316-18-0.281

 

Material: Stainless Steel & Nickel
HEMI Part #: GS 316-18-0.281

• Braided wire strap consisting of 50% CRES 316L Stainless Steel & 50% Nickel 200

• Braid rolled to 1/20" thickness

• 1" wide CRES 316L Stainless Steel end terminals

• 9/32" terminal holes for use with 3/8" bolt

• Length hole-to-hole: Custom

• Conforms to the exacting MIL-DTL-24749 Revision B

• HEMI Part #: GS 316-X-0.281

 

Material: Stainless Steel & Nickel
HEMI Part #: GS 316-X-0.281
Mounting Hardware

• Corrosion resistant CRES 316L Stainless Steel

• 3/8 inch flat washer

• In accordance with MIL-F-18240 and MIL-S-1222

• Fits both Rev A and Rev B boss assemblies

• HEMI Part #: GS 104

 

Material: Stainless Steel
HEMI Part #: GS 104

• Corrosion resistant CRES 316L Stainless Steel

• 3/8 inch -16 bolt

• 3/4 inch long

• Self-locking

• Fits both Rev A and Rev B boss assemblies

• HEMI Part #: GS 103

 

Material: Stainless Steel
HEMI Part #: GS 103